{"title":"Fixed \u0026 Floating Bollards","description":"\u003cp\u003eFixed \u0026amp; floating bollards are used within rigging systems to support controlled lowering and load management during professional work at height. This collection includes solutions suited to arboriculture, forestry, and other rigging applications where secure rope handling and stability are essential.\u003c\/p\u003e\n\u003cp\u003eDesigned to integrate into demanding rigging setups, these bollards support smooth operation and consistent control under load. By helping manage forces safely and effectively, the range supports reliable performance and efficient working practices across challenging professional environments.\u003c\/p\u003e","products":[{"product_id":"stein-ld1000-floating-friction-device","title":"Stein LD1000 Floating Friction Device","description":"\u003ch2\u003eStein LD1000 Floating Friction Device\u003c\/h2\u003e\n\u003cp\u003eThe Stein LD1000 Floating Friction Device is a rope friction device designed for controlled lowering of timber or objects from elevated positions during arborist rigging work. Built for practical, site-ready use, it offers a straightforward solution where predictable rope control and efficient setup are required. Its design supports consistent performance across a range of lowering tasks while remaining easy to install and operate in professional working environments.\u003c\/p\u003e\n\u003ch4\u003eFlexible mounting for adaptable rigging setups\u003c\/h4\u003e\n\u003cp\u003eThe LD1000 Floating Friction Device can be mounted in either orientation, allowing operators to adapt quickly to different anchor points and site layouts. This flexibility supports efficient rigging setup without the need for additional components or complex adjustments. By keeping installation simple and adaptable, the device helps crews maintain workflow efficiency while responding to changing site conditions.\u003c\/p\u003e\n\u003ch4\u003eControlled rope handling with guided friction\u003c\/h4\u003e\n\u003cp\u003eReplaceable fairleads guide the rope through the device, supporting smooth friction control during lowering operations. These fairleads also allow secure tie-off when required and can act as redirects, enabling operators to manage loads from a safer working distance. Designed to accept ropes up to 14 mm in diameter, the LD1000 supports a working load limit of 1000 kg, providing controlled performance for a wide range of rigging tasks.\u003c\/p\u003e\n\u003ch4\u003eSystem compatibility and surface protection\u003c\/h4\u003e\n\u003cp\u003eThe Stein LD1000 Floating Friction Device is compatible with Stein Hauler Kits, allowing loads to be raised before lowering or assisting with pre-tensioning within the rigging system. This capability supports more controlled load management during complex operations. A removable and replaceable protection rubber helps protect mounting surfaces during use and can be replaced as part of routine maintenance. With a device weight of 3.3 kg, it remains manageable to handle and transport on site while supporting repeated professional use.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRope friction device designed for controlled lowering tasks\u003c\/li\u003e\n\u003cli\u003eMounts in either orientation for flexible rigging setup\u003c\/li\u003e\n\u003cli\u003eCompatible with Stein Hauler Kits for lifting or pre-tensioning\u003c\/li\u003e\n\u003cli\u003eReplaceable fairleads supporting rope guidance and redirection\u003c\/li\u003e\n\u003cli\u003eSupports ropes up to 14 mm in diameter\u003c\/li\u003e\n\u003cli\u003eWorking load limit of 1000 kg\u003c\/li\u003e\n\u003cli\u003eRemovable protection rubber helping protect mounting surfaces\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDevice weight: 3.3 kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompleted with a plated finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fletcher Stewart","offers":[{"title":"Default","offer_id":52425345466711,"sku":"SS-24LD1000","price":156.51,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/0785\/8263\/files\/Stein-LD1000-Floating-Friction-Device.jpg?v=1769490723"},{"product_id":"stein-ld1250-floating-friction-device","title":"Stein LD1250 Floating Friction Device","description":"\u003ch2\u003eStein LD1250 Floating Friction Device\u003c\/h2\u003e\n\u003cp\u003eThe Stein LD1250 Floating Friction Device is a rope friction device designed for controlled lowering of timber or objects from elevated positions during arborist rigging operations. Its user-friendly layout supports efficient setup on site, with a design that allows mounting in either orientation. This flexibility helps operators adapt quickly to different anchor points and working conditions while maintaining clear and predictable rope control.\u003c\/p\u003e\n\u003ch4\u003eFlexible mounting for adaptable rigging setups\u003c\/h4\u003e\n\u003cp\u003eThe LD1250 Floating Friction Device can be installed in either orientation, allowing the device to be positioned to suit site layout and operator preference. This adaptability supports quicker setup and adjustment during rigging tasks, helping maintain workflow efficiency. The straightforward configuration keeps operation clear, supporting consistent handling during controlled lowering from height.\u003c\/p\u003e\n\u003ch4\u003eGuided rope control with replaceable fairleads\u003c\/h4\u003e\n\u003cp\u003eReplaceable fairleads guide the rigging line through the device, supporting smooth friction management during lowering. These fairleads also allow secure tie-off when required and can act as redirects, enabling operators to work from a safer distance. Designed to accept ropes up to 16 mm in diameter, the device supports controlled handling under load while maintaining predictable performance.\u003c\/p\u003e\n\u003ch4\u003eCompatibility and protection during operation\u003c\/h4\u003e\n\u003cp\u003eThe LD1250 Floating Friction Device is compatible with Stein Hauler Kits, allowing loads to be raised before lowering or assisting with pre-tensioning as part of the rigging system. A removable and replaceable protection rubber helps protect mounting surfaces during use. With a working load limit of 1250 kg and a device weight of 4.43 kg, it is suited to regular professional use in demanding rigging environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRope friction device designed for controlled lowering tasks\u003c\/li\u003e\n\u003cli\u003eMounts in either orientation for flexible rigging setup\u003c\/li\u003e\n\u003cli\u003eCompatible with Stein Hauler Kits for lifting or pre-tensioning\u003c\/li\u003e\n\u003cli\u003eReplaceable fairleads supporting rope guidance and redirection\u003c\/li\u003e\n\u003cli\u003eSupports ropes up to 16 mm in diameter\u003c\/li\u003e\n\u003cli\u003eWorking load limit of 1250 kg\u003c\/li\u003e\n\u003cli\u003eRemovable protection rubber helping protect mounting surfaces\u003c\/li\u003e\n\u003cli\u003eDevice weight: 4.43 kg\u003c\/li\u003e\n\u003cli\u003eCompleted with a plated finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fletcher Stewart","offers":[{"title":"Default","offer_id":52425345630551,"sku":"SS-24LD1250","price":181.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/0785\/8263\/files\/Stein-LD1250-Floating-Friction-Device.jpg?v=1769490736"},{"product_id":"stein-ld750-floating-friction-device","title":"Stein LD750 Floating Friction Device","description":"\u003ch2\u003eStein LD750 Floating Friction Device\u003c\/h2\u003e\n\u003cp\u003eThe Stein LD750 Floating Friction Device is a rope friction device designed for controlled lowering of timber or objects from height during arborist rigging operations. Its straightforward design supports quick setup on site and allows the device to be mounted in either orientation, giving operators flexibility when configuring rigging systems. This makes it suitable for varied site conditions where efficient, predictable lowering is required.\u003c\/p\u003e\n\u003ch4\u003eFlexible mounting for efficient rigging setup\u003c\/h4\u003e\n\u003cp\u003eThe LD750 Floating Friction Device \u003cspan style=\"font-size: 0.875rem;\"\u003ecan be mounted in either orientation, allowing users to adapt installation to suit the working position or anchor point. This flexibility supports faster setup and adjustment during rigging tasks, helping operators maintain momentum on site. The simple layout keeps operation clear and accessible, supporting controlled rope handling throughout the lowering process.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eControlled lowering with guided rope management\u003c\/h4\u003e\n\u003cp\u003eReplaceable fairleads guide the rope during use, supporting smooth friction control while helping manage rope direction. These fairleads also allow tie-off when required and can act as redirects, enabling operators to work from a safer distance with improved control. Designed to accept ropes up to 13 mm in diameter, the device supports a working load limit of 750 kg for controlled lowering tasks.\u003c\/p\u003e\n\u003ch4\u003eCompatibility and surface protection during use\u003c\/h4\u003e\n\u003cp\u003eThe LD750 Floating Friction Device is compatible with Stein Hauler Kits, allowing loads to be raised before lowering or supporting pre-tensioning within the system. A removable protection rubber helps protect mounting surfaces during operation and can be replaced when worn. With a device weight of 1.925 kg, it balances manageable handling with robust performance for regular professional use.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRope friction device designed for controlled lowering tasks\u003c\/li\u003e\n\u003cli\u003eMounts in either orientation for flexible on-site setup\u003c\/li\u003e\n\u003cli\u003eCompatible with Stein Hauler Kits for lifting or pre-tensioning\u003c\/li\u003e\n\u003cli\u003eReplaceable fairleads supporting rope guidance and redirection\u003c\/li\u003e\n\u003cli\u003eSupports ropes up to 13 mm in diameter\u003c\/li\u003e\n\u003cli\u003eWorking load limit of 750 kg\u003c\/li\u003e\n\u003cli\u003eRemovable protection rubber helping protect mounting surfaces\u003c\/li\u003e\n\u003cli\u003eDevice weight: 1.925 kg\u003c\/li\u003e\n\u003cli\u003eCompleted with a plated finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fletcher Stewart","offers":[{"title":"Default","offer_id":52425345728855,"sku":"SS-24LD0750","price":131.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/0785\/8263\/files\/Stein-LD750-Floating-Friction-Device.jpg?v=1769490746"},{"product_id":"stein-rc2001-fixed-lowering-device","title":"Stein RC2001 Fixed Lowering Device","description":"\u003ch2\u003eStein RC2001 Fixed Lowering Device\u003c\/h2\u003e\n\u003cp\u003eThe Stein RC2001 Fixed Lowering Device is a medium-duty, single bollard lowering solution designed for controlled arborist rigging operations. Built for secure rope handling and straightforward installation, it allows a single operator to mount the device efficiently using the top attachment point as a suspension aid. This practical approach supports faster setup while maintaining a stable and predictable working position on the stem.\u003c\/p\u003e\n\n\u003ch4\u003eEfficient one-person installation on the tree\u003c\/h4\u003e\n\u003cp\u003eThe RC2001 is designed to be mounted using a dedicated ratchet strap, with a backed-up choked sling used at the base anchor point for additional security. The top attachment point allows the unit to be suspended during installation, making positioning and fixing manageable for one operator. This setup supports consistent placement and reliable anchoring during medium-duty rigging tasks.\u003c\/p\u003e\n\n\u003ch4\u003eControlled rope handling for higher working loads\u003c\/h4\u003e\n\u003cp\u003eSharing the same 76 mm drum diameter as the RC2000, the RC2001 supports the use of larger working ropes and controlled lowering under higher loads. It accommodates ropes up to 16 mm in diameter and features angled rope guide bars that help manage rope flow around the bollard. With a working load limit of up to 2000 kg, subject to mounting type, it is well suited to controlled lowering in demanding but appropriate applications.\u003c\/p\u003e\n\n\u003ch4\u003eDurable construction and system compatibility\u003c\/h4\u003e\n\u003cp\u003eWeighing 5.1 kg, or 5.8 kg when fitted with protection rubbers, the RC2001 offers a balance of strength and manageable handling. Its zinc plated and powder coated finish supports durability during regular site use. With overall dimensions of 185 mm by 185 mm and a height of 325 mm, it remains compact on the stem while providing compatibility with the RC-3100 pre-tension pulley for expanded system use.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMedium-duty fixed lowering device with single bollard design\u003c\/li\u003e\n  \u003cli\u003eTop attachment point supporting one-person mounting\u003c\/li\u003e\n  \u003cli\u003eSupplied with ratchet strap and webbing for secure fixing\u003c\/li\u003e\n  \u003cli\u003eAngled rope guide bars supporting controlled rope flow\u003c\/li\u003e\n  \u003cli\u003eSupports ropes up to 16 mm in diameter\u003c\/li\u003e\n  \u003cli\u003eWorking load limit up to 2000 kg subject to mounting type\u003c\/li\u003e\n  \u003cli\u003eCompatible with the RC-3100 pre-tension pulley\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Fletcher Stewart","offers":[{"title":"Default","offer_id":52425350086999,"sku":"SS-RC2001","price":359.55,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/0785\/8263\/files\/Stein-RC2001-Fixed-Lowering-Device.jpg?v=1767099654"},{"product_id":"stein-rcw3001-lowering-device","title":"Stein RCW3001 Lowering Device","description":"\u003ch2\u003eStein RCW3001 Lowering Device\u003c\/h2\u003e\n\u003cp\u003eThe Stein RCW3001 Lowering Device is a professional rigging bollard designed to give arborists controlled load handling during lowering operations, with the added flexibility to integrate a winch when lifting is required. With a working load limit of up to 3000 kg, the Stein RCW3001 Lowering Device supports demanding rigging tasks while keeping lowering control fully independent from the winch system.\u003c\/p\u003e\n\u003ch4\u003eIndependent bollard control with winch compatibility\u003c\/h4\u003e\n\u003cp\u003eThis device operates primarily as a standalone lowering bollard, meaning the load remains supported directly on the drum during descent. When lifting is required, the compatible RC Winch can be attached or removed within seconds without tools. Because the winch connects independently via a friction hitch and winch line, the system allows controlled lifting, smooth load transfer, and unrestricted lowering once the winch is disengaged.\u003c\/p\u003e\n\u003ch4\u003eEfficient rope handling for heavier rigging lines\u003c\/h4\u003e\n\u003cp\u003eThe RCW3001 features a large diameter drum designed to manage ropes up to 19 mm in diameter. The 45-degree angled rope guides allow wraps to be added or removed quickly, helping operators fine-tune friction based on load weight and working conditions. This setup supports consistent rope flow and predictable control when lowering heavier sections.\u003c\/p\u003e\n\u003ch4\u003eBuilt for demanding site use\u003c\/h4\u003e\n\u003cp\u003eWeighing over 13 kg excluding the winch and mounting straps, the Stein RCW3001 Lowering Device offers the mass and stability required for controlled rigging. The unit is secured using a ratchet strap, with the option to back this up using an anchor sling depending on site requirements. Supplied protective rubbers help reduce contact damage when mounted against the tree, supporting responsible rigging practice.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOperates as a standalone lowering bollard without a winch\u003c\/li\u003e\n\u003cli\u003eAccepts RC Winch attachment and removal without tools\u003c\/li\u003e\n\u003cli\u003eSupports working loads up to 3000 kg depending on mounting type\u003c\/li\u003e\n\u003cli\u003eLarge diameter drum for controlled handling of ropes up to 19 mm\u003c\/li\u003e\n\u003cli\u003e45-degree rope guides allow quick adjustment of friction wraps\u003c\/li\u003e\n\u003cli\u003eSupplied with protective rubbers to help protect the tree\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fletcher Stewart","offers":[{"title":"Default","offer_id":52425350971735,"sku":"SS-RCW3001","price":528.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/0785\/8263\/files\/Stein-RCW3001-Lowering-Device.jpg?v=1767099674"},{"product_id":"stein-smb1000-rigging-bollard","title":"Stein SMB1000 Rigging Bollard","description":"\u003ch2\u003eStein SMB1000 Rigging Bollard\u003c\/h2\u003e\n\u003cp\u003eThe Stein SMB1000 Rigging Bollard is a compact, single-bollard lowering device developed for controlled rigging work in arboriculture. Updated for 2024, this version introduces improvements aimed at durability, rope management, and ease of handling on site. Designed to support precise lowering operations, it allows the working line to be managed confidently while keeping setup straightforward for the operator.\u003c\/p\u003e\n\u003ch4\u003eCompact design with improved rope handling\u003c\/h4\u003e\n\u003cp\u003eThis rigging bollard is built around a single-bollard configuration and incorporates dual-entry rope guides, allowing the rope to be fed from either side depending on the work position. Front and rear aluminium fairleads guide the line smoothly through the device, supporting consistent rope flow during lowering. Because the fairleads are replaceable, long-term wear can be managed without replacing the entire unit.\u003c\/p\u003e\n\u003ch4\u003eControlled lowering with practical load capacity\u003c\/h4\u003e\n\u003cp\u003eThe Stein SMB1000 Rigging Bollard is rated with a working load limit of 1000 kg and is suitable for use with ropes up to 14 mm in diameter. This capacity supports a wide range of controlled lowering tasks while maintaining a compact footprint. Weighing 4.3 kg, the device can be mounted by a single operator, which helps speed up installation and reduces strain during setup.\u003c\/p\u003e\n\u003ch4\u003eTree protection and secure mounting\u003c\/h4\u003e\n\u003cp\u003eTo help minimise contact damage to the tree, the device is fitted with replaceable preservation rubbers. These components act as a buffer between the bollard and the stem during use. The supplied ratchet strap uses 50 mm webbing with a breaking strength of 6000 kg and complies with EN12195-2:2001. This strap allows the bollard to be secured to trees up to 145 cm in diameter, supporting stable positioning throughout the operation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSingle bollard lowering device with 2024 design updates\u003c\/li\u003e\n\u003cli\u003eReplaceable aluminium fairleads to manage wear over time\u003c\/li\u003e\n\u003cli\u003eDual-entry rope guides for flexible rope routing\u003c\/li\u003e\n\u003cli\u003eFront and rear fairleads support smooth rope travel\u003c\/li\u003e\n\u003cli\u003eReplaceable preservation rubbers to help protect the tree\u003c\/li\u003e\n\u003cli\u003eCompact weight allows single-operator installation\u003c\/li\u003e\n\u003cli\u003eBreaking strength of 6000 kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum tree diameter is 145 cm\u003c\/li\u003e\n\u003cli\u003eSuitable for use with ropes up to 14 mm in diameter\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis device weighs 4.3 kg, with a working load limit of 1000 kg\u003c\/li\u003e\n\u003cli\u003eBollard finish - Lacquered with rust prevention\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOverall dimensions of 210mm wide and 310mm high\u003c\/li\u003e\n\u003cli\u003eBollard measures 73mm in diameter and 140mm in length\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fletcher Stewart","offers":[{"title":"Default","offer_id":52425358999895,"sku":"SS-24SMB1000","price":236.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/0785\/8263\/files\/Stein-SMB1000-Rigging-Bollard.jpg?v=1767099799"},{"product_id":"ftc-mini-cylindre-hr-2-1-lowering-device","title":"FTC MINI-CYLINDRE HR 2.1 Lowering Device","description":"\u003ch2\u003eFTC MINI-CYLINDRE HR 2.1 Lowering Device\u003c\/h2\u003e\n\u003cp\u003eThe FTC MINI-CYLINDRE HR 2.1 Lowering Device is a compact, high-capacity friction device designed for precise and controlled rigging during tree care operations. Developed for professional arborists, it supports efficient lowering and holding of branches or timber while maintaining predictable rope control. Supplied ready to use with its strap and transport box, the Mini-Cylindre HR 2.1 integrates easily into established rigging workflows.\u003c\/p\u003e\n\u003ch4\u003ePrecision rigging with enhanced rope management\u003c\/h4\u003e\n\u003cp\u003eThe device features a round upper ring that allows rope reeving, while two fairleads at the end of the cylinder keep rope wraps correctly aligned and prevent overlap. A third fairlead positioned beneath the cylinder enables finer, more precise control during rigging, supporting smooth handling when managing variable loads. The system is approved for ropes up to 16 mm in diameter, making it suitable for common arborist rigging lines.\u003c\/p\u003e\n\u003ch4\u003eAluminium construction with stable, symmetrical design\u003c\/h4\u003e\n\u003cp\u003eManufactured entirely from aluminium, the Mini-Cylindre HR 2.1 is designed not to heat up during use, helping protect rigging ropes from heat damage. Six rubber silent blocks protect the tree and help keep the device stable when loaded. Its symmetrical layout allows the ground crew to work comfortably from either the left or right side, supporting flexible site positioning and efficient communication during operations.\u003c\/p\u003e\n\u003ch4\u003eStrength ratings, dimensions, and supplied components\u003c\/h4\u003e\n\u003cp\u003eThe Mini-Cylindre HR 2.1 has a stated distortion strength of 50 kN and a working load limit of 10 kN, providing a strong performance margin for professional rigging. The plate measures 340 mm in height including the half ring, 120 mm in width, and 20 mm in thickness, with a cylinder diameter of 100 mm. The device weighs 3.6 kg on its own and 7.2 kg when supplied with the 9 m strap and transport box. The strap is suitable for trees up to 2 m in diameter, and the box measures 30 cm by 40 cm with a height of 23.5 cm. The device complies with Machinery Directive 2006\/42\/CE.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCompact friction device for precise tree rigging operations\u003c\/li\u003e\n\u003cli\u003eEntirely aluminium construction to limit rope heating\u003c\/li\u003e\n\u003cli\u003eUpper ring allows rope reeving\u003c\/li\u003e\n\u003cli\u003eTwo fairleads prevent rope wrap overlap\u003c\/li\u003e\n\u003cli\u003eThird fairlead enables finer rigging control\u003c\/li\u003e\n\u003cli\u003eSix rubber silent blocks protect the tree and improve stability\u003c\/li\u003e\n\u003cli\u003eSymmetrical design for left or right ground crew operation\u003c\/li\u003e\n\u003cli\u003eMaximum approved rope diameter of 16 mm\u003c\/li\u003e\n\u003cli\u003e50 kN distortion strength with 10 kN working load limit\u003c\/li\u003e\n\u003cli\u003eSupplied with strap and transport box for easy setup\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FTC","offers":[{"title":"Default","offer_id":52665763692887,"sku":"FTC\/MNC-HR2.1","price":474.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/0785\/8263\/files\/FTC-MINI-CYLINDRE-HR-2_1-Lowering-Device.jpg?v=1769666529"},{"product_id":"ftc-micro-cylindre-2-1-lowering-device","title":"FTC MICRO-CYLINDRE  2.1 Lowering Device","description":"\u003ch2\u003eFTC MICRO-CYLINDRE 2.1 Lowering Device\u003c\/h2\u003e\n\u003cp\u003eThe FTC MICRO-CYLINDRE 2.1 Lowering Device is a compact friction device designed for controlled lowering and holding of branches or small logs during tree care and minor felling operations. Developed as a lightweight yet robust rigging solution, it is intended for professional arborists who require reliable rope control without excessive bulk. Supplied ready to install, the Micro-Cylindre 2.1 integrates easily into existing FTC lowering setups and is delivered complete in its transport box.\u003c\/p\u003e\n\u003ch4\u003eCompact friction system for controlled lowering\u003c\/h4\u003e\n\u003cp\u003eThe Micro-Cylindre 2.1 functions as a rope friction device used to manage loads during dismantling work. Its design supports smooth holding and lowering of cut material while maintaining predictable rope behaviour. With a maximum approved rope diameter of 14 mm, it suits common rigging ropes used in tree care. The round ring at the top allows for reeving, and two fairleads at the end of the cylinder keep rope wraps correctly positioned and prevent overlapping during operation.\u003c\/p\u003e\n\u003ch4\u003eLightweight aluminium construction with balanced handling\u003c\/h4\u003e\n\u003cp\u003eManufactured entirely from aluminium, the Micro-Cylindre 2.1 is designed not to heat up excessively during use, helping protect rigging ropes from heat damage. Rubber bumpers help keep the device stable when mounted on the tree. The symmetrical layout allows the ground worker to operate comfortably from either the left or right side, supporting flexible site positioning. With a device weight of 1.7 kg, it offers a favourable balance between portability and strength.\u003c\/p\u003e\n\u003ch4\u003eStrength ratings and supplied components\u003c\/h4\u003e\n\u003cp\u003eThe Micro-Cylindre 2.1 has a minimum breaking strength of 40 kN and a stated working load limit of 8 kN, delivering a strong performance margin for its size. The plate measures 225 mm in height, up to 165 mm in width, and 15 mm in thickness, with a cylinder diameter of 75 mm. It is supplied with 9 m straps suitable for trees up to 2 m in diameter, and a transport box measuring 30 cm by 40 cm with a height of 19.5 cm. Total weight including strap and box is 4.9 kg. The device complies with Machinery Directive 2006\/42\/CE.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCompact friction device for lowering and holding rigging ropes\u003c\/li\u003e\n\u003cli\u003eDesigned for minor felling and controlled branch or log lowering\u003c\/li\u003e\n\u003cli\u003eEntirely aluminium construction to limit rope heating\u003c\/li\u003e\n\u003cli\u003eRubber bumpers for added stability on the tree\u003c\/li\u003e\n\u003cli\u003eTop ring allows rope reeving\u003c\/li\u003e\n\u003cli\u003eTwo fairleads keep rope wraps aligned and prevent overlap\u003c\/li\u003e\n\u003cli\u003eSymmetrical design allows left or right ground operation\u003c\/li\u003e\n\u003cli\u003eMaximum rope diameter of 14 mm\u003c\/li\u003e\n\u003cli\u003e40 kN minimum breaking strength with 8 kN working load limit\u003c\/li\u003e\n\u003cli\u003eSupplied ready to install with straps and transport box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FTC","offers":[{"title":"Default","offer_id":52665764020567,"sku":"FTC\/MCC-C2.1","price":310.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0953\/0785\/8263\/files\/FTC-MICRO-CYLINDRE-2_1-Lowering-Device.jpg?v=1769666532"}],"url":"https:\/\/treeworker.com\/collections\/fixed-floating-bollards.oembed","provider":"www.treeworker.com","version":"1.0","type":"link"}